A neck-heavy guitar or a neck dive is common for certain guitars. The dive means that the guitar is not balanced, and the neck part moves towards the ground even when a person is trying to straighten it. In today's blog, you'll find out how to repair the situation, whether it's worth turning to a repair shop, and the tools you'll probably need. Once the repair is done, we suggest reading about the guitar holder DIY project we mentioned to secure your instrument in the future.

Are There Reasons You Should Avoid Guitar Repair Shops?

Whether your guitar strings broke or you have a completely different issue with your beloved guitar, the first thing you usually go to is the repair shop. But is this a smart idea, or should you try a DIY guitar repair and fix a neck-heavy string instrument? This is the time when you can run to the nearest hardware store or Home Depot to get the tools you need to take care of the instrument yourself.

However, there are good and bad sides to doing things yourself. For example, if you need to hang a guitar on the wall, installing the holder is very easy and done with tools you already have at home. On the other hand, fixing things can be a bit tricky, and some repairs require special tools that can cost a fortune. However, if you're planning on using these tools all the time or thinking about opening your repair shop, the investment will surely be worth it. When your purpose is to quickly fix an issue that doesn't cost too much at the repair shop, then that's the route to take. 

Another thing that might influence your decision is your experience. For example, if you're a guitar obsessive who's been playing this instrument for years, you probably want to take care of it as well. However, if you're a beginner and still unsure about many things, you should definitely consider taking it to the repair shop. 

What Are Guitar Repair Tools?

There are so many different guitar repair tools and sets you can find online, but there are a few that you'll see everywhere. 

  • Setup kits
  • Screwdrivers
  • Wrenches
  • Gauges
  • Fret bender
  • Frat and file
  • Files

Step-By-Step Guide on How to Fix Your Guitar and Not Cause Damage to It in the Future

Unfortunately, many guitar owners have trouble with a neck-heavy guitar or bass. These issues can be very tough to manage and can take a lot of time and expertise. What's even worse, they can prevent you from playing your guitar or even working with it. However, there are a few ways you can fix your guitar and then find a way to prevent damage. After you try the method that works best for you, we recommend installing a guitar holder stand or wall hangers and knowing that it will be safe from trouble. 

Add Weight to the Guitar

One of the first and easiest steps you should take is adding weight to your guitar. This is the straightforward option that most people can do, even those that aren't very handy with tools. For this purpose, you need to get sticky wheel weights and add them inside the guitar. You need to reach into the guitar cavity located right below the bridge. When you place the weight here, it will eliminate the neck heaviness and will take care of the problem. You should be very careful if using other materials to add weight since some can interfere with your guitar's electronics. You can coat the weight material with electrical tape to avoid any damage. The wheel weights that we mentioned are entirely safe to use. 

Add Weight to the Strap

If the first option doesn't work, or you want to try a different one, you should add weight to the strap. It should be on the same side of the bridge so that it can bring back the guitar to its initial position. You can use various types of weights, including weights with velcro straps, lead weights in a small bag, and any other type you can think of. This method is slightly more efficient than the previous one, and it's easier to pull off. In addition, adding things inside the guitar is trickier and riskier. 

Hang Guitar on the Wall

If you're an absolute guitar obsessive, and you have an entire guitar room, then chances are properly displaying your guitars is your biggest priority. Now that you learned how to fix your instrument, it's time to see how to hang your guitar and protect it from future damage. Whether you'll opt for a DIY wall mount or a guitar stand, it's up to you. The most important thing is keeping it safe and saving yourself from trips to the repair store. 

The Wooden Guitar Wall Holder is a popular guitar wall hanger thanks to its stunning appearance, craftsmanship, and how securely it will hold your precious guitar. The holder is made of 100% solid wood and is lined with felt, so it won't damage your guitar neck. Each piece is pure beauty to the tiniest detail, so you'll not only have a secure way to keep your instrument, but you'll also have the most gorgeous guitar holder. Thanks to the sturdy materials, the holder is quite durable, won't scratch, and won't damage your instrument. The best thing is that you can add several guitar wall hooks and use them to store all your guitars. This product is compatible with all guitars and ukuleles.


After taking care of the neck-heavy situation, you have to place the guitar somewhere where it will be safe. The idea of using the best guitar wall hanger we mentioned above is straightforward and can look very expensive if you find the right one.